ä=ae | ö=oe | ü=ue | ß=ss

Becherglas englisch | Becherglas translation

Deutsch English
Substantive nouns
Becherglas beaker
Becherglas tumbler
Becherglas glass
Becherglas beaker glass
Sprachgebrauch usage
hohes Becherglas highball glass
Die Lösung reichte bis zum 500 ml-Marke auf dem Becherglas. The solution came up to the 500-ml mark on the beaker.
…und Methioninsulfon und c = 10 nmol/50 μl der übrigen Aminosäuren: 2,2 g Natriumchlorid (3.10) werden in einem 100-ml-Becherglas in 30 ml Citratpufferlösung (3.24) gelöst. …of cysteic acid and methionine sulphone and c = 10 nmol/50 μl of the other amino acids. Dissolve 2,2 g sodium chloride (3.10) in 100 ml beaker with 30 ml citrate buffer (3.24).
Die Temperatur wird auf 35 °C eingestellt; anschließend werden 100 µl Kälberlab (Labstärke 1: 10000, ca. 3000 U/ml) hinzugegeben. 1 Minute wird gerührt; danach wird das Becherglas mit einer Aluminiumfolie abgedeckt eine Stunde bei einer Temperatur von 35 °C stehen gelassen, damit sich der Quark/Topfen bilden kann. Adjust the temperature to 35 °C and add 100 μl of calf rennet (rennet activity 1: 10000, c. 3000 U/ml), stir for 1 minute and then leave the beaker covered with an aluminium foil at 35 °C for one hour to allow formation of the curd.
Das Fett wird durch das Filterpapier mit dem wasserfreien Natriumsulfat gefiltert, und das entstehende Filtrat in einem im Ofen (5.5) vorgehaltenen Becherglas aufgefangen. Filter the fat through the filter paper containing anhydrous sodium sulfate collecting the filtrate in a beaker maintained in the oven (5.5).
Zum Ansetzen der 1 %igen Standardprobe werden 495 ml Büffelmagermilch in einem 1-l-Becherglas mit 5,00 ml Kuhmagermilch versetzt und durch Zusetzen verdünnter Milchsäure (10 % w/w) auf einen pH-Wert von 6,4 eingestellt. For the preparation of the 1 % standard add 5,00 ml of bovine skimmed milk to a 495 ml of buffalos’ skimmed milk in a 1 l beaker, adjust the pH to 6,4 by the addition of dilute lactic acid (10 % w/v).
Die Probe wird 10 Minuten bei 500 g (2000 bis 3000 Umin–1) zentrifugiert und der Überstand in ein Becherglas mit einem Fassungsvermögen von 150 bis 200 ml abgegossen. Beim Abgießen ist darauf zu achten, dass kein Material verloren geht. Centrifuge at 500 g (2000 to 3000 rpm) for 10 minutes and decant the clear aqueous supernatant into a 150 to 200 ml beaker, taking care that no loose material on the bottom goes over.
Zur restlosen Überführung des Kieselgels in die Säule ist das Becherglas mit dem Elutionsmittel (4.10) zu spülen. Hahn öffnen und soviel Elutionsmittel ablaufen lassen, bis der Elutionsmittelspiegel etwa 2 mm über dem Kieselgel liegt. Check that all the silica gel is in the column; wash with developer solvent (4.10), open the stopcock and allow the liquid to reach a level about 2 mm above the level of the silica gel.
Erlenmeyerkolben oder Becherglas (Borsäure) Flask or beaker (Boric acid)
Absetzen lassen und 10,0 ml der überstehenden Lösung in ein Becherglas pipettieren. Allow the sediment to settle and pipette 10,0 ml of the supernatant solution into a beaker.
Nach dem Absetzen lassen werden mit einer Pipette 10,0 ml der überstehenden Lösung in ein 100-ml-Becherglas gegeben. Allow the sediment to settle and pipette 10,0 ml of the supernatant solution into a 100 ml beaker.
2,5 g der zu testenden Flüssigkeit werden mit 2,5 g getrockneter Cellulose in einem Becherglas mit einem Rührstab aus Glas gemischt. 2,5 g of the liquid to be tested is mixed with 2,5 g of dried cellulose in a glass beaker using a glass stirring rod.
In einem 100-ml-Becherglas 25 g Kieselgel (4.1) in etwa 80 ml Elutionsmittel suspendieren, dann mithilfe eines Trichters in die Säule geben. In a beaker prepare a suspension of 25 g of silica gel (4.1) in about 80 ml of developer solvent and pour it into the column using a funnel.
In einem 100-ml-Becherglas 25 g Kieselgel (4.2.4) in 80 ml Elutionsmittel (4.2.3) suspendieren, dann mit Hilfe eines Glastrichters (4.1.6) in die Säule geben. In a 100 ml beaker, suspend 25 g of silica gel (4.2.4) in 80 ml of elution mixture (4.2.3), then transfer it to the column by means of a glass funnel (4.1.6).
Die Asche wird mit Wasser angefeuchtet und in ein 250-ml-Becherglas gegeben. Moisten the ashes with water and transfer these in a beaker of 250 ml.
0,5 ml Wasserstoffperoxid (3.1) werden mit 4,5 ml phenolhaltiger Ameisensäurelösung (3.19) in einem kleinen Becherglas gemischt. Mix 0,5 ml hydrogen peroxide (3.1) with 4,5 ml formic acid-phenol solution (3.19) in a small beaker.
Die ablaufende Flüssigkeit wird in einem Becherglas aufgefangen; man wäscht mit 50 ml destilliertem Wasser nach. Rinse the column with 50 ml of distilled water.
Umgerührt wird mit dem Glasstab, der in dem Becherglas zu belassen ist. Letzteres wird mit einem Uhrglas abgedeckt. Stir with the glass rod, which shall be left in the beaker, and cover the beaker with a watch-glass.
10 ml dieser Emulsion in ein 50-ml-Becherglas geben, anschließend 0,3 ml Natriumcholatlösung (0,2 g/ml) und 20 ml destilliertes Wasser hinzufügen. Pour 10 ml of the emulsion into a 50 ml beaker, then 0,3 ml of a 0,2 g/ml sodium cholate solution and then 20 ml of distilled water.
Von der klaren Lösung werden 10,0 ml in ein 100-ml-Becherglas gegeben, und unter Verwendung von Natriumhydroxidlösung (3.18) wird der pH-Wert auf 2,20 eingestellt. Die Lösung wird mit Citratpufferlösung (3.24) in einen Messkolben geeigneter Größe überführt und mit Citratpufferlösung (3.24) zur Marke… Place 10,0 ml of the resulting solution into a 100 ml beaker and adjust the pH to 2,20 using sodium hydroxide solution (3.18), transfer to a volumetric flask of appropriate volume using citrate buffer (3.24), and make up to the mark with the buffer…
Die Asche wird mit 75 ml Salzsäure (3.1) in ein Becherglas von 250 bis 400 ml Fassungsvermögen überführt und anschließend, wie unter 5.1 zweiter Absatz beschrieben, weiterbehandelt. Place the ash in a 250 to 400 ml beaker using 75 ml of hydrochloric acid (3.1); continue as described in the second subparagraph of 5.1.
Die Asche wird zusammen mit 75 ml Salzsäure (3.1) in ein Becherglas von 250 bis 400 ml Inhalt überführt. Place the ash in a 250 to 400 ml beaker using 75 ml of hydrochloric acid (3.1).
Dann wird das Becherglas auf ein Sandbad gestellt und bis zur Trockne eingedampft, um die Kieselsäure unlöslich zu machen. Place the beaker on a sand bath and evaporate until dry to make the silica insoluble.
Das Becherglas bei 37 °C in einen Thermostaten stellen; die Elektroden des pH-Meters und den Spiralrührer einsetzen. Put the beaker in a thermostat set at 37 °C; introduce the electrodes of the pH meter and the screw agitator.
219,5 g Zinkacetat (4.8) werden in einem Becherglas in Wasser aufgelöst. Dissolve 219,5 gram zinc acetate (point 4.8) in water in a beaker glass.
219,5 g Zinkacetat (4.5) in einem Becherglas in Wasser auflösen, in einen 1000-ml-Messkolben gießen, 30 ml Essigsäure (4.8) zugeben, gründlich mischen und mit Wasser auffüllen. Dissolve 219,5 gram zinc acetate (4.5) in water in a beaker glass. Rinse into a volumetric flask of 1000 ml, add 30 ml acetic acid (4.8). Mix thoroughly and make up with water.
106,0 g Kaliumhexacyanoferrat (II) (4.9) werden in einem Becherglas in Wasser aufgelöst und in einen 1000-ml-Messkolben überführt. Dissolve 106,0 gram potassium hexacyanoferrate (II) (point 4.9) in water in a beaker glass. Rinse into a volumetric flask of 1000 ml.
106,0 g Kaliumhexacyanoferrat (II) (4.6) in einem Becherglas in Wasser auflösen, in einen 1000-ml-Messkolben gießen, gründlich mischen und mit Wasser auffüllen. Dissolve 106,0 gram potassium hexacyanoferrate (II) (4.6) in water in a beaker glass. Rinse into a volumetric flask of 1000 ml. Mix thoroughly and make up with water.
Die Flüssigkeit wird in einen 500-ml-Messkolben übergespült, wobei das Becherglas mehrmals mit heißem Wasser ausgewaschen wird. Decant the liquid into a 500 ml graduated flask, rinsing the beaker several times with hot water.
Je nach dem Verfahren für die pH-Wert-Einstellung (5.3.3) wird der Inhalt der Flasche quantitativ mit Citratpufferlösung (3.24) in ein 250-ml-Becherglas oder in einen 250-ml-Rundkolben überführt. Depending on the procedure for pH adjustment (5.3.3), quantitatively transfer the contents of the bottle to a 250 ml beaker or a 250 ml round-bottom flask, using citrate buffer (3.24).
Das Becherglas wird mit einem Uhrglas abgedeckt, bzw. dem Erlenmeyerkolben wird ein Rückflusskühler aufgesetzt. Cover the beaker with a watch glass or fit the conical flask with a reflux condenser.
C Becherglas ohne Ausguss C the lipless exposure beaker
Die Asche wird in ein 250-ml-Becherglas gebracht, 20 ml Wasser und so viel Salzsäure (3.2) zugefügt, bis das Aufbrausen ausbleibt. Transfer the ash into a 250 ml beaker. Add 20 ml of water and hydrochloric acid (3.2) until effervescence ceases.
Nach dem Nachlassen der eventuell erneut auftretenden Gasentwicklung wird das Becherglas 30 min lang oder, wenn notwendig, länger in ein siedendes Wasserbad gestellt, bis die vollständige Hydrolyse eventuell vorhandener Stärke eingetreten ist. Es wird warm durch einen aschefreien Filter filtriert. Wait for any release of gas to cease then place the beaker in a boiling water bath and keep it there for 30 minutes or longer, if necessary, in order to hydrolyse thoroughly any starch which may be present.
Von der Analysenprobe werden 5 g auf 1 mg genau in ein Becherglas von 250 bis 400 ml Fassungsvermögen eingewogen. Weigh 5 g of the sample to the nearest mg and place in a 250 to 400 ml beaker.
16,4 g Natriumacetat (4.7) in ein Becherglas einwiegen, in Wasser auflösen und in einen 1000-ml-Messkolben gießen. Weigh 16,4 gram sodium acetate (4.7) into a beaker glass. Dissolve in water and rinse into a volumetric flask of 1000 ml.
Von der Probe (siehe Bemerkung 8.2) werden 2,5 g auf 1 mg genau abgewogen und in ein 400-ml-Becherglas oder einen 300-ml-Erlenmeyerkolben gebracht. Anschließend werden 100 ml Salzsäure (3.3) und einige Körner Bimsstein hinzugefügt. Weigh 2,5 g of the sample to the nearest 1 mg (see point 8.2), place in a 400 ml beaker or a 300 ml conical flask and add 100 ml of hydrochloric acid (3.3) and fragments of pumice stone.
1,000 ±0,001 g der Magermilchpulver-Probe werden in ein 25-ml-Becherglas (5.2) eingewogen. Weigh 1,000 ± 0,001 g of the SMP sample into a 25 ml beaker (5.2).
Für eine Einzelbestimmung werden 50 g Probe auf 0,01 g genau abgewogen und in das Becherglas (5.2) gegeben. Weigh to the nearest 0,01 gram approximately 50 grams of the sample into the beaker (5.2).
Zur restlosen Überführung des Kieselgels in die Säule ist das Becherglas mit dem Elutionsmittel zu spülen und die Spülflüssigkeit ebenfalls in die Säule zu geben. To ensure the complete transfer of the silica gel to the column, wash the beaker with the elution mixture and transfer the washing portions to the column too.
Das Becherglas und der Filter werden mit 5 ml heißer 6 mol/l Salzsäure (3.2) und 2-mal mit kochendem Wasser ausgewaschen. Wash the beaker and filter with 5 ml of hot 6 mol/litre hydrochloric acid (3.2) and twice with boiling water.
Die Schale wird mit insgesamt etwa 5 ml Salzsäure (3.1) ausgespült, die anschließend langsam und vorsichtig (da es aufgrund von CO2-Bildung eventuell zu einer heftigen Reaktion kommen kann) in das Becherglas gegeben wird. Wash the crucible out with a total of about 5 ml of hydrochloric acid (3.1) and add the latter slowly and carefully to the beaker (there may be a vigorous reaction due to CO2 formation).